Skip to content
VULT SecurityGet started

Protect the Person Behind the Policy: A Better Model for Insurance Identity Security

Verify the person behind consequential insurance actions to reduce fraud exposure and strengthen the case for lower premiums.

Insurance accounts can be compromised even when requests look legitimate. VULT Security verifies the authorized human, confirms real-time presence, and binds their authorization to the exact claim, policy, or recovery action.

A beneficiary designation changes. A claim payment is redirected. An account is recovered using a new email address. On a screen, each may look like an ordinary service request. For the person affected, it can change who receives money, who can access sensitive information or who can act on their behalf.

An insurer may receive the request through a valid account, a familiar phone number or a convincing message. Before acting on it, the insurer needs to establish more than whether the information looks right.

Is the person authorized to make this request present and personally authorizing this exact action?

Verified-human authorization connects a person’s verified identity and real-time presence to a specific action. VULT Security applies that model to protected insurance workflows, combining a government-ID-verified identity, fresh server-side liveness and biometric matching, and an authorization bound to the event.

The insurer retains its decisions about coverage, entitlement, permissions and execution. VULT Security verifies the human exercising the authority the insurer recognizes.

The economic benefit could extend to premiums. Preventing an impersonator from redirecting a claim payment or changing a policy can reduce fraud losses and the liability exposure associated with acting on unauthorized instructions. If those improvements reduce expected costs and are reflected in pricing, policyholders could benefit from lower premiums.

Insurance Security Must Protect Data and Decisions

Insurance brings together information about people’s finances, health, property, families and claims. The National Association of Insurance Commissioners identifies the sensitive financial and health information collected through underwriting and claims as a significant cybersecurity responsibility for insurers and producers.

Protecting those records is essential. So is protecting the decisions that change them.

A secure claims system can still receive a fraudulent instruction through a compromised account. An employee can receive a convincing request to change a customer’s contact details. A legitimate policy record can be used to make an impersonator sound informed.

These situations require controls over access, data handling and the person authorizing the action. VULT Enterprise adds human verification at the protected events an insurer selects, alongside its existing security and insurance systems.

No Substitution for the Human

When a system lets an account proceed because it accepts a password, token, passkey, device, certificate or authentication factor, that information is being used as a substitute for the actual human.

Authentication methods provide different levels of protection. Phishing-resistant authentication, for example, offers protections that a password alone does not. NIST describes digital authentication through verification of control over authenticators associated with an account, with stronger requirements at higher assurance levels.

For a consequential insurance request, the additional requirement is specific: establish that the verified person is present and personally authorizing the event now presented.

At VULT Security, the principle is No substitution for the human. Knowing policy details, possessing credentials or controlling an active session does not replace the fresh verification required for a protected authorization.

Verify the Person at Enrollment and Every Protected Event

VULTid establishes a reusable verified identity by validating a government-issued ID, matching the live person’s face to the ID photograph and binding that identity to a protected biometric template.

Enrollment establishes the identity reference. Every protected authorization then requires fresh real-time liveness, Proof-of-Presence and server-side biometric matching to that verified identity.

The person does not ordinarily need to rescan their ID for each interaction. They must demonstrate that they are the same living person linked to it. An identity check performed when a policy was opened does not stand in for their presence during a later protected change.

VULTid uses the protected server-side template for this comparison. It does not rely on the phone’s locally enrolled biometric as the identity reference.

The insurer decides when this verification is required. Within every event protected by that requirement, the human is checked again.

The Right Person Depends on the Insurance Action

Insurance roles are not interchangeable. The policyowner, insured person, beneficiary, claimant, agent and authorized representative may be different people.

VULTid verifies an individual. The insurer determines whether that individual has authority for the requested action, based on its records, the policy, supporting documentation and applicable requirements.

For a life insurance claim, the relevant person might be a beneficiary or estate representative. For a policy change, it might be the policyowner or a representative whose authority the insurer has validated. Internal decisions may require an adjuster, supervisor or another authorized employee.

Verifying who someone is does not automatically give them permission to act. The identity check must connect to the correct role and the specific request.

Protected insurance event

Person the insurer must identify as authorized

What the authorization should specify

Finalizing a claim submission

Claimant or recognized representative.

The claim, submission version and declarations being submitted.

Changing a beneficiary or policy ownership

Person with authority to request that change.

The policy and the exact proposed designation, allocation or ownership change.

Changing claim-payment instructions

Person entitled to provide the instructions.

The claim or payment reference, recipient and destination details.

Recovering account access

Account user or recognized representative under the recovery policy.

The account and the precise access or contact changes requested.

Authorizing sensitive-record access

Person entitled to authorize or perform that access.

The records, recipient or requesting party, and permitted scope.

Authorizing a settlement-related or internal action

Relevant customer, representative or insurer employee.

The exact terms, document version, amount or operational change involved.

The insurer still determines whether required forms, signatures, consent and other conditions have been satisfied.

Bind Identity and the Exact Event to the Authorization

An insurer needs evidence of what the verified person authorized. A general identity confirmation should not become permission for unrelated changes.

VULT Security calls its model Event-and-Identity-Bound Authorization: binding a verified human’s identity and real-time presence to their authorization of one specific action, supported by a protected evidence record.

If a customer authorizes a new mailing address, that authorization does not extend to a beneficiary change. If a claimant authorizes one payment destination, a different destination requires a new authorization.

The person must see the material details of the requested event. The authorization is single-use and bound to that event and verified human. A material change to the request requires a new authorization.

The insurer’s executing system must enforce that scope. Before applying the change, it checks the person’s current authority, validates the authorization and confirms that the operation matches the event presented. The same requirements need to apply across the channels through which that protected action can be completed.

A Practical Example: A Beneficiary Change

Consider a request to change the beneficiary designation on a life insurance policy. The request arrives through an authenticated customer account, but the insurer requires verified-human authorization before accepting this type of change.

  1. The insurer establishes authority. It determines who may request the change and which policy conditions, documentation and other requirements apply.
  2. The workflow presents the exact request. The authorized person sees the policy reference, proposed beneficiary designation, allocation and other material details.
  3. VULT Security verifies the human. Fresh liveness and server-side biometric matching confirm the person against their government-ID-linked identity. Their explicit authorization is bound to the presented request.
  4. The insurer validates and acts. Its systems check that the authorization is valid, unused and associated with the same request. The insurer applies its remaining controls and determines whether the change can take effect.
  5. The records are connected. The protected authorization record is linked to the policy transaction and its outcome.

Changing the beneficiary details after the person’s authorization would require a new authorization. A completed check for another service request would not satisfy this event.

If verification cannot be completed, the insurer handles the request through its defined review process. It does not record an unsuccessful or bypassed check as completed verified-human authorization.

Claims Verification and Claim Truthfulness Are Different Questions

Insurance fraud includes more than impersonation. The NAIC describes deliberate deception across buying, using, selling and underwriting insurance, involving consumers and industry participants alike.

A verified person can still exaggerate a loss, submit fabricated supporting material or provide misleading information. Confirming their identity does not establish that the claimed event occurred or that the policy covers it.

VULT Security strengthens the identity and authorization component: which verified person was present, what they were shown and what they personally authorized. Claims teams and fraud systems continue to evaluate the loss, supporting evidence, coverage, recipient legitimacy and other relevant facts.

For legitimate customers, that distinction also matters. The objective is to protect their instructions and identity while preserving the insurer’s ability to assess the claim on its merits.

Breached Information Should Not Become Permission to Act

Insurance-sector disclosures show how much personal information can be exposed through compromised access. In June 2025, Aflac disclosed an incident and said its preliminary findings indicated that social engineering had been used to gain network access. Its December 2025 update reported that personal information associated with approximately 22.65 million individuals was involved.

For insurers, these disclosures reinforce the need to examine both access to sensitive data and the use of that information in later interactions.

If a criminal has a person’s address, date of birth or policy details, asking them to repeat those facts cannot reliably distinguish them from the person. A protected VULTid event instead requires fresh human verification linked to the established identity and authorization of the specified action.

This addresses a route for misusing stolen information. It does not recover exposed data or replace the controls needed to prevent unauthorized access and extraction.

Possessing a person’s insurance information should not give someone else the ability to act in their name.

Account Recovery Deserves Its Own Protected Event

Recovery changes who can regain access to an account or use its authentication methods. It therefore needs a defined authorization of its own.

For an enrolled user, an insurer can require a fresh VULTid check before restoring access, replacing a contact address or accepting another protected recovery instruction. The check uses the established verified identity, rather than treating knowledge of account details as sufficient evidence of the person.

The scope must remain clear. Authorization to restore access does not automatically authorize a beneficiary change, a records disclosure or new payment instructions.

The insurer retains responsibility for recovery policy, representative authority and any alternate process. Exceptions should be documented accurately and should not be represented as successful VULTid verification.

Privacy Without a New Collection of Identity Images

Insurance companies already hold substantial sensitive information. Stronger human verification should avoid adding unnecessary copies of the images used to establish identity.

By default, VULT Security does not store face photographs, face videos or government-issued ID images.

The platform verifies the government-issued ID, matches the live person’s face to the ID photograph and binds that verified identity to a protected, non-reversible biometric template. It retains the template for future comparisons without retaining the original face or ID images.

Face photographs, videos and ID images are retained only when an organization explicitly requests that storage. If an insurer requests image retention for a defined recordkeeping need, that is a specific arrangement, not the platform’s default.

The retained template remains biometric data. VULT Security protects it using homomorphic encryption and rotating keys. The insurer can receive the necessary verification result and authorization evidence without maintaining its own biometric template repository.

This reduces unnecessary collection for verification. The insurer’s policy, claims and customer records still require their own protections and retention controls.

Protect Employees’ and Representatives’ Authorizations Too

Sensitive insurance actions also originate inside the organization. An adjuster may authorize a claim-related instruction. A supervisor may direct a settlement-related action. An administrator may change access to customer records.

VULT Enterprise can place verified-human authorization at those selected events, while the insurer’s IAM, PAM, workflow and fraud systems retain their responsibilities.

Where policy requires two people, each can provide a separate authorization tied to the same defined event. The insurer determines whose participation is required and whether the combination satisfies its rules.

Automation can follow the same boundary. An AI system may prepare a recommendation or proposed change, while the workflow requires the designated human to review and authorize the exact action before execution. The executing system must enforce that scope; a human authorization should not become unrestricted permission for future automated actions.

Create a Traceable Record of Who Authorized What

A protected evidence record connects the verified identity, real-time presence check, event presented, explicit authorization and time of the interaction.

The insurer should link that record to the action its system actually performed. This allows a reviewer to examine whether the executed change matched the person’s authorization and whether the required permissions and controls were applied.

That record can support customer disputes, fraud investigations, internal reviews, audits and legal review. It provides evidence of the authorization without requiring routine retention of the original face or ID images.

The authorization and the resulting insurance transaction should be traceable to one another.

How Verified-Human Authorization Could Help Lower Premiums

Insurance fraud imposes costs on insurers and the people who buy coverage. The National Association of Insurance Commissioners identifies fraud as a contributor to higher premiums. For property and casualty insurance, actuarial cost estimates consider expected claims and expenses, making a measurable reduction in fraud-related costs relevant to the economics of coverage.

Consider an attempt to redirect a claim payment using stolen account information. The protected VULTid workflow still requires fresh verification of the authorized person and their explicit authorization of that payment destination. Preventing the diversion can avoid the loss and the recovery effort it would trigger. A protected evidence record also gives the insurer a basis for resolving a later dispute about who authorized the instruction.

This creates a credible case for lower premiums: fewer successful impersonation attempts can mean fewer fraud losses, lower dispute costs, and reduced liability exposure from unauthorized actions. Where insurers measure those improvements and recognize them in underwriting and pricing, verified-human authorization could help lower the cost of coverage. The risk reduction applies to the protected workflows; coverage obligations and other forms of fraud remain part of the insurer’s assessment.

To establish that benefit, insurers can compare fraud loss frequency and severity, recovery costs, and dispute-handling expenses before and after deployment, accounting for the cost of the control. The amount and timing of any premium reduction would depend on the demonstrated results, the coverage involved, and applicable rating requirements.

Fit the Protection Into Existing Insurance Operations

VULT Enterprise adds verified-human authorization through integrated workflows. Claims management, policy administration, identity systems, fraud analytics and insurer decision rules continue to perform their existing functions.

A practical deployment begins by identifying consequential events, determining whose authorization they require and establishing an enforcement point before each action takes effect. Coverage follows the workflows and channels that are integrated.

VULT Security’s assurance materials include its completed 2026 SOC 2 Type II attestation, ISO/IEC 27001:2022 certification and HIPAA business associate agreement readiness for applicable workflows. These support institutional due diligence alongside review of the deployment’s scope and data handling.

Explore VULT Security’s capabilities for the broader identity, privacy and authorization model. View the full capability and competitor comparison for the detailed feature and assurance assessment.

Insurance protects people from consequential losses. Its digital processes should also protect their ability to direct what happens to their policies, claims and personal information. When verified-human authorization reduces the losses and disputes that insurers must fund, it can strengthen the economic case for lower premiums as well as stronger protection.

Verify the person. Bind the authorization to the request. Preserve the evidence.


Frequently Asked Questions

What does VULT Security add to insurance identity security?

VULT Security connects a government-ID-verified identity, fresh real-time presence and the person’s explicit authorization to a specific insurance action. The insurer determines whether the person has authority and whether the action may proceed.

Could VULT Security help lower insurance premiums?

Yes, potentially. By preventing unauthorized instructions in protected workflows and preserving evidence of who authorized each event, VULT Security can help reduce identity-related fraud losses, dispute costs, and associated liability exposure. If insurers demonstrate those cost reductions and reflect them in underwriting and pricing, premiums could decrease. Premium effects depend on measured results, the risks covered by each policy, and the insurer’s pricing decisions.

Is the customer verified only during onboarding?

No. Enrollment establishes the verified identity. Every protected authorization requires fresh liveness and server-side biometric matching to that identity. The customer does not ordinarily need to rescan their ID each time.

Can VULT Security protect beneficiary and payment-instruction changes?

Yes, within integrated workflows. VULTid verifies the person and binds their authorization to the exact proposed change. The insurer validates entitlement, policy requirements and other conditions before execution.

Can a beneficiary or authorized representative use VULTid?

Yes. The insurer determines which individual has authority for the specific action and validates that authority separately. VULTid verifies that individual; it does not assume the insured person must perform every insurance action.

Does verifying the claimant prove that a claim is legitimate?

No. Verified-human authorization establishes evidence about the person and their authorization. The insurer still assesses the claim’s facts, supporting documents, coverage and fraud indicators.

Can VULTid be used during account recovery?

Yes. An integrated recovery workflow can require fresh verification against the enrolled identity before restoring access or accepting specified recovery changes. The authorization remains limited to that recovery event.

Does VULT Security store face photographs, videos or ID images?

Not by default. It retains a protected, non-reversible biometric template for future comparisons. Original face photographs, videos and ID images are retained only when an organization explicitly requests that storage.

Does VULT Security replace an insurer’s MFA, fraud detection or claims systems?

No. VULT Enterprise adds verified-human authorization at integrated events. Existing systems continue to manage authentication, claims evaluation, policy rules, permissions, fraud analysis and execution.

Can VULT Security support insurance employees and AI-assisted workflows?

Yes. The insurer can require a designated employee’s verified-human authorization for a defined internal action, including an action prepared by automation. The executing workflow must enforce the event’s scope.

Sources

  1. National Association of Insurance Commissioners: Cybersecurity
  2. NIST SP 800-63B-4: Digital Authentication Guidelines, Introduction
  3. National Association of Insurance Commissioners: Insurance Fraud
  4. Aflac: Cybersecurity Incident Disclosure, June 20, 2025
  5. Aflac: Security Incident Update, December 19, 2025
  6. Actuarial Standards Board: ASOP No. 53, Estimating Future Costs for Prospective Property/Casualty Risk Transfer and Risk Retention